400P Portable Compressor Kit

12V 33% Duty 150 PSI

by Viair
$344.06
SKU NWD-40043

Features our brand new I-Beam Sand Tray for improved stability and lighter weight. The 400P is a larger powerful portable tire inflator kit that can inflate up to a 35-inch tire from 0 to 30 PSI in less than 6 minutes. Used and approved of by off road enthusiasts worldwide, the 400P can save you when you’re miles from home.

Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. – Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose is not recommended in sub zero or freezing conditions. The 400P does not work with Presta bicycle valves.

  • Features
  • Technical Specs
  • Videos
  • Instructions

If you're an off-road racer, ATV trail guide, or just a driver with a daily commute, you don't want to have to worry about a deflated tire. Keep the Viair 400P Portable Air Compressor Kit in your trunk and your own peace of mind. This powerful portable compressor works for tires up to 35 inches big. Connect it to the vehicle battery, start your engine, connect it to the valve stem, and turn it on! Monitor the tire pressure with the 100 PSI inline gauge. The compressor kit also includes a vibration-resistant diamond-plate sand tray, 3 inflation tips, 5-in-1 inflator/deflator air hose, inline 100 PSI gauge, deluxe carry bag, 40-amp inline fuse holder, and dual battery clamps.

  • For tires up to 35 inches
  • Powerful portable compressor
  • 150 PSI / 2.30 CFM
  • Comes with vibration-resistant diamond-plate sand tray, 3 inflation tips, 5-in-1 inflator/deflator air hose, inline 100 PSI gauge, deluxe carry bag, 40-amp inline fuse holder, and dual battery clamps
  • Connects to your vehicle battery, then connects to valve stem, and turns on
  • Monitor tire pressure with 100 PSI inline gauge
  • 12 V
  • Permanent magnet motor
  • Maximum 12V amp draw: 30 amps
  • Maximum 24V amp draw: 15 amps
  • Duty cycle: 33% @ 100 PSI
  • Ingress protection rating: IP54
  • Power cord length: 8 feet
  • Air hose length: 25 feet
  • Dimensions: 10.87 x 5.83 x 7.48 inches
  • Weight: 10.4 pounds
 
 
Features Specs
– Thermal Overload Protector
– 5-in-1 Inflator/Deflator Air Hose
with Inline 100 PSI Gauge
– I-beam Sand Tray
– Deluxe Dual Compartment Carry Bag
– 40-amp Inline Fuse Holder
– Dual Battery Clamps
– 3 pc. Inflation Tips Kit
 
 
– 12-Volt / 24-Volt
– Permanent Magnetic Motor
– Duty Cycle: 33% @ 100 PSI
– Max. Working Pressure: 150 PSI
– Max. 12V Amp Draw: 30 Amps
– Max. 24V Amp Draw: 15 Amps
– Ingress Protection Rating: IP54
– Dimensions: 10.87″L x 5.83″W x 7.48″H
– Net Weight: 10.40 lbs.
– Power Cord Length: 8 ft.
– Air Hose Length: 25 ft.